How to use
A. How to charge

1. Powered by USB
Fast charging is possible when using a 9V termination output charger.

2. When the power is connected, the LED indicator starts flashing, indicating that it is ready for charging.

3. Mount one side of the smartphone first on the wireless charger, then push in the other side.
B. How to use Air Vent Mount

1. Loosen the lever counterclockwise and stretch out the hook to the right length

2. Hook the air vent blade and tighten the lever clockwise.
B. How to adjust the lever

1. Mount your smartphone on the wireless charger and adjust the lever to secure it in the proper position.

2. Remove your smartphone and tighten it up by adjusting the lever to the right side a bit.

3. Check whether your smartphone is fixed well after adjusting. If the smartphone isn't properly fitted in the charger, it may fall while driving. Make sure that your smartphone is adjusted correctly before driving.
Indicator light identification
Red LED indicator light is on. |  Red Led indicator is flashing fast. |
Red and Green are flashing for 5 seconds.
|  Green LED indicator light is on. |
Precautions for use
Precaution
Fast wireless charging requires a quick car charger which supports more than 9V (ex : QC2.0/3.0 or PD)
Charging is only available for devices that support wireless charging.
Please do not vigorously extrude, collide or dismantle the product, as this may cause malfunction.
Please do not put the product into fire or water when it is powered on, to avoid short circuits or leakage.
Please do not place the metal (Such as coin etc.) on the charging pad when charging, to avoid damage from heating.
If you use this with a USB port built into a car or an unstable car cigarette lighter charger, it may cause device malfunctions. This air vent mount is not compatible with certain types of vents, such as circular or curved shapes.
Redbean One - Year Limited Warranty Summary
Redbean warrants the included hardware product and accessories against defects in materials and workmanship for one year from the date of the original retail purchase.
Redbean does not warrant against normal wear and tear, nor damage caused by accident or abuse.
To obtain service, please visit a Redbean Online Service Center(redbean.support). Please refer to the full terms and detailed information on obtaining service available at (redbean.support/warranty). If you submit a valid claim under this warranty, Redbean will either repair, replace, or refund your hardware device at its own discretion.You may be required to provide proof of purchase details when making a claim under this warranty.
Product information
A. Components

B. Product Detail


Specifications
Category
| Details
|
---|
Model | Redbean G.O Wlireless Charger |
Model No. | C1WR |
Color | Modern Black |
Produt Standard | Qi |
KC Certification | R-R-RBN-C1WR |
Size | ∅86.3 x 55.1 x 56mm / 64g |
Product Material | ABS + PC |
Input | DC 12V ; 1.5A / 9V ; 1.67A / 5V ; 2A |
Output | 15W / 10W / 7.5W / 5W |
Charging Port | USB TYPE-C |
How to use
A. How to charge

1. Powered by USBFast charging is possible when using a 9V termination output charger.
2. When the power is connected, the LED indicator starts flashing, indicating that it is ready for charging.
3. Mount one side of the smartphone first on the wireless charger, then push in the other side.
B. How to use Air Vent Mount
1. Loosen the lever counterclockwise and stretch out the hook to the right length
2. Hook the air vent blade and tighten the lever clockwise.
B. How to adjust the lever
1. Mount your smartphone on the wireless charger and adjust the lever to secure it in the proper position.
2. Remove your smartphone and tighten it up by adjusting the lever to the right side a bit.
3. Check whether your smartphone is fixed well after adjusting. If the smartphone isn't properly fitted in the charger, it may fall while driving. Make sure that your smartphone is adjusted correctly before driving.
Indicator light identification
Red LED indicator light is on.
Red Led indicator is flashing fast.
Green LED indicator light is on.
Precautions for use
Precaution
Fast wireless charging requires a quick car charger which supports more than 9V (ex : QC2.0/3.0 or PD)
Charging is only available for devices that support wireless charging.
Please do not vigorously extrude, collide or dismantle the product, as this may cause malfunction.
Please do not put the product into fire or water when it is powered on, to avoid short circuits or leakage.
Please do not place the metal (Such as coin etc.) on the charging pad when charging, to avoid damage from heating.
If you use this with a USB port built into a car or an unstable car cigarette lighter charger, it may cause device malfunctions. This air vent mount is not compatible with certain types of vents, such as circular or curved shapes.
Redbean One - Year Limited Warranty Summary
Redbean warrants the included hardware product and accessories against defects in materials and workmanship for one year from the date of the original retail purchase.
Redbean does not warrant against normal wear and tear, nor damage caused by accident or abuse.
To obtain service, please visit a Redbean Online Service Center(redbean.support). Please refer to the full terms and detailed information on obtaining service available at (redbean.support/warranty). If you submit a valid claim under this warranty, Redbean will either repair, replace, or refund your hardware device at its own discretion.You may be required to provide proof of purchase details when making a claim under this warranty.
Product information
A. Components
B. Product Detail
Specifications