Components
Product Detail
How to use
A. How to Charge
1. After connecting the cable to the adapter and P1.
2. LED indicator should turn blue and you're ready to charge.
B. Use different angles
C. LED Indicator
Blue LED
Chargeable status
| 
Red LED
Charging
| 
Flicker
Blue & Red
Charging errors |
Precautions for use
Smartphone battery safety measures
As with other wireless chargers, your smart device or P1 may get slightly warmer during charging. To extend the lifespan of your battery, if the battery gets too warm, the software might limit charging above 80 percent.
Magnetic, RFID chip Damage
Don't place credit cards, security badges, passports, or key fobs between your smart device and P1, as this may damage magnetic strips or RFID chips in those items. If you have a case that holds any of these sensitive items, remove them before charging or make sure that they are not positioned between the back of your device and the charger.
Prolonged Heat Exposure
Your P1 may become very warm during normal use. It’s important to place your P1 on a hard, stable, and well-ventilated work surface when in use or charging. Use common sense to avoid situations where your body is in prolonged contact with a device or its power adapter when it’s operating or plugged into a power source, as sustained contact with warm surfaces may cause discomfort or injury. Take special care if you have a physical condition that affects your ability to detect heat against the body.
Precaution
Recommend using 25W or higher USB-C Power Adapter that supports 9V/3A for faster wireless charging up to 22W. Charging is only available for devices that support wireless charging.
Please do not vigorously extrude, collide or dismantle, as this may cause malfunction.
Please do not put the product into fire or water when it is powered on, to avoid short circuit or leakage.
Please do not place the metal (Such as coin etc.)
On the charging pad when charging, to avoid damage from heating.
If you use an unstable charger, it can cause malfunction in the product.
Redbean One - Year Limited Warranty Summary
Redbean warrants the included hardware product and accessories against defects in materials and workmanship for one year from the date of the original retail purchase.
Redbean does not warrant against normal wear and tear, nor damage caused by accident or abuse.
To obtain service, please visit a Redbean Online Service Center(redbean.support). Please refer to the full terms and detailed information on obtaining service available at (redbean.support/warranty). If you submit a valid claim under this warranty, Redbean will either repair, replace, or refund your hardware device at its own discretion.You may be required to provide proof of purchase details when making a claim under this warranty.
Specifications
| Category | Details |
|---|
Model | Redbean The better 3in1 Wireless Charger |
Model No. | P1 |
| Size | 68x68x23.3mm / 190g |
Color | Silver, Space Gray |
Certification | ROHS, CE, FCC, KC |
| Input | 5V-3A / 9V-2.22A / 12V-3A
|
| Ouput | 2W/5W/7.5W/10W/15W（Total 22W Max）
|
| Material | Aluminum Alloy, Silicon
|
Components
Product Detail
How to use
A. How to Charge
1. After connecting the cable to the adapter and P1.
2. LED indicator should turn blue and you're ready to charge.
B. Use different angles
C. LED Indicator
Blue LED
Chargeable status
Red LED
Charging
Flicker
Blue & Red
Charging errors
Precautions for use
Smartphone battery safety measures
As with other wireless chargers, your smart device or P1 may get slightly warmer during charging. To extend the lifespan of your battery, if the battery gets too warm, the software might limit charging above 80 percent.
Magnetic, RFID chip Damage
Don't place credit cards, security badges, passports, or key fobs between your smart device and P1, as this may damage magnetic strips or RFID chips in those items. If you have a case that holds any of these sensitive items, remove them before charging or make sure that they are not positioned between the back of your device and the charger.
Prolonged Heat Exposure
Your P1 may become very warm during normal use. It’s important to place your P1 on a hard, stable, and well-ventilated work surface when in use or charging. Use common sense to avoid situations where your body is in prolonged contact with a device or its power adapter when it’s operating or plugged into a power source, as sustained contact with warm surfaces may cause discomfort or injury. Take special care if you have a physical condition that affects your ability to detect heat against the body.
Precaution
Recommend using 25W or higher USB-C Power Adapter that supports 9V/3A for faster wireless charging up to 22W. Charging is only available for devices that support wireless charging.
Please do not vigorously extrude, collide or dismantle, as this may cause malfunction.
Please do not put the product into fire or water when it is powered on, to avoid short circuit or leakage.
Please do not place the metal (Such as coin etc.)
On the charging pad when charging, to avoid damage from heating.
If you use an unstable charger, it can cause malfunction in the product.
Redbean One - Year Limited Warranty Summary
Redbean warrants the included hardware product and accessories against defects in materials and workmanship for one year from the date of the original retail purchase.
Redbean does not warrant against normal wear and tear, nor damage caused by accident or abuse.
To obtain service, please visit a Redbean Online Service Center(redbean.support). Please refer to the full terms and detailed information on obtaining service available at (redbean.support/warranty). If you submit a valid claim under this warranty, Redbean will either repair, replace, or refund your hardware device at its own discretion.You may be required to provide proof of purchase details when making a claim under this warranty.
Specifications